Rainwater capturing is easier a
venture today when you are aware of the rainwater harvesting systems,
harnessing the advanced technology to collect rainwater would be easier. Today
from the open surface you can hold water in an underground or an over ground
holding tank. The harvested rainwater is then sieved properly and then the same
is pumped out straightway to the appliances or to the header tank. The
rainwater system is useful for flashing toilets, washing vehicles, washing
machines, gardening and irrigation, sinks, showers and baths. However, this
practice is not something new but number of innovation has taken place
advancing the system suitably.
Rainwater Harvesting System
Water companies are increasing
their prices and with the growing population together with the growing demand
on mains water, rainwater harvesting system is one of the best ways to save water also reduce the comprehensive
civilization impact upon the environmental. Rainwater is one free natural
resource which can easily and wonderfully be captured, stored and used for
varying household and commercial chores. Whether you are living in an old
building or new, the roof, downpipes and the gutter system can very well be
used for gravity rainwater harvesting.
The rainwater system for
harvesting as provided by the Freeflush, is undoubtedly ideal for meeting the
high non profitable water demands, such system offers remarkable short terms
payback on your well thought-out investment, the systems that Freeflush offers
will certainly suit your requirements and budgets as they can easiky be
installed and tailored into your premises.
What Freeflush Offers
Here you will get the complete rainwater harvesting system which
includes the water butt, filter, diverter and pump. You can buy the individual
system or buy the complete packages if you are for the first time installing
the system.
Diverter
In maximum systems the water
flows through the down or drain pipe to the water butt, and diverters are the
pipes used to connect the drainpipe to the water butt.
Filter
Filtering is certainly integral.
Filters are meant to remove the contamination such as organic wastes, dust and
leaves. Irrespective of the using of water, it is mandatory and useful to
remove the contaminants and filter is installed in sometimes in the downpipe
and sometimes in the water butt.
Water Butt
Water butts are meant to collect
the rainwater and made of plastic and kept on the ground and if you want they
can also be mounted on the wall.
Pump
Pumps are used for moving the
water to where it is required. Pumps are installed within the water butt,
addressed as ‘submersible pumps’ whereas the ‘non-submersible’ ones are placed
outside.